High Transparency 2:1 Hard Art Floor Coating (Model: 208AB)
Product Name: High Transparency 2:1 Hard Art Floor Coating
Product Model: 208AB
Product Application: Construction of Various Retro Fancy Floors
Product Features
The environmentally friendly hard resin art floor coating can cure at room temperature, with moderate viscosity, high transparency, no bubbles, strong adhesion, excellent leveling property and appropriate operation time. It is suitable for the construction of various art floors. The cured coating has high hardness, flat surface, gloss and yellowing resistance.
Product Physical Properties
| Item | 208A | 208B |
|---|---|---|
| Color | Transparent Liquid | Transparent Liquid |
| Viscosity (25℃) | 800-1000 mPa·s | 200-300 mPa·s |
| Shelf Life (25℃) | 6 Months | 6 Months |
Application Process
- Mix Ratio: A:B = 100:50 (weight ratio)
- Pot Life: 10 minutes at 25℃ (for 10KG mixed amount)
- Curing Condition: 6-7 hours at room temperature
- The floor to be constructed must be kept dry and clean;
- Before use, check Agent A for sedimentation and stir Agent A thoroughly until uniform;
- Take the required amount according to the mix ratio and weigh accurately. Please remember that the ratio is by weight, not by volume. After mixing Agent A and Agent B, stir thoroughly to avoid incomplete curing;
- After stirring uniformly, carry out construction in a timely manner and try to use up the mixed solution within the pot life;
- During the curing process, keep the environment clean to prevent impurities or dust from falling on the surface of the uncured coating.
Properties After Curing
- 1) Hardness: Shore D ＞80
- 2) Withstand Voltage: 22 KV/mm
- 3) Bending Strength: 28 Kg/mm²
- 4) Volume Resistance: 1×10¹⁵ Ohm³
- 5) Surface Resistance: 5×10¹⁵ Ohm·m²
Precautions
- 1. This type of product must be stored in a sealed, light-proof container at 25℃ with relative humidity ＜70%.
- 2. Since Agent B of this type of product is easy to absorb moisture and deteriorate, the packaging barrel must be tightly sealed immediately after use.
- 3. After mixing, it will start to cure gradually, its viscosity will increase gradually, and some heat will be released;
- 4. The more glue mixed together, the faster the reaction, the faster the curing speed, and a lot of heat may be released. Please pay attention to controlling the amount of one-time mixing, because due to the accelerated reaction, its service time will also be shortened. The mixed glue should be used up as soon as possible;
- 5. Pot life: refers to the time when the viscosity of the mixed glue doubles at 25℃, not that the glue can never be used after the operable time;
- 6. Necessary labor protection supplies such as goggles must be worn during operation to do a good job in personal safety protection.
